MG(1) General Commands Manual MG(1)
mg - emacs-like text editor
mg [-nR] [-f mode] [+number] [file ...]
mg is intended to be a small, fast, and portable editor for people who
can't (or don't want to) run emacs for one reason or another, or are not
familiar with the vi(1) editor. It is compatible with emacs because
there shouldn't be any reason to learn more editor types than emacs or
The options are as follows:
Go to the line specified by number (do not insert a space between
the `+' sign and the number). If a negative number is specified,
the line number counts backwards from the end of the file i.e.
+-1 will be the last line of the file, +-2 will be second last,
and so on.
Run the mode command for all buffers created from arguments on
the command line, including the scratch buffer and all files.
-n Turn off backup file generation.
-R Files specified on the command line will be opened read-only.
WINDOWS AND BUFFERS
When a file is loaded into mg, it is stored in a buffer. This buffer may
be displayed on the screen in more than one window. At present, windows
may only be split horizontally, so each window is delineated by a
modeline at the bottom. If changes are made to a buffer, it will be
reflected in all open windows.
If a file is changed outside mg and its buffer is about to be changed, mg
prompts if the change should go ahead (y), not go ahead (n) or if the
buffer should be reverted (r) to the latest file on disk.
If a buffer name begins and ends with an asterisk, the buffer is
considered throwaway; i.e. the user will not be prompted to save changes
when the buffer is killed.
POINT AND MARK
The current cursor location in mg is called the point (or dot). It is
possible to define a window-specific region of text by setting a second
location, called the mark. The region is the text between point and mark
inclusive. Deleting the character at the mark position leaves the mark
at the point of deletion.
Note: The point and mark are window-specific in mg, not buffer-specific,
as in other emacs flavours.
Backup files have a `~' character appended to the file name and are
created in the current working directory by default. Whether to create
backup files or not can be toggled with the make-backup-files command.
The backup file location can either be in the current working directory,
or all backups can be moved to a ~/.mg.d directory where files retain
their path name to retain uniqueness. Use the backup-to-home-directory
to alternate between these two locations. Further, if any application
creates backup files in /tmp, these can be left with the leave-tmpdir-
mg supports tag files created by ctags(1), allowing the user to quickly
locate various object definitions. Note though that emacs uses etags,
mg supports navigating source code using cscope. However, mg requires
cscope and cscope-indexer executables to be present in PATH for it to
DEFAULT KEY BINDINGS
Normal editing commands are very similar to GNU Emacs. In the following
examples, C-x means Control-x, and M-x means Meta-x, where the Meta key
may be either a special key on the keyboard or the ALT key; otherwise ESC
followed by the key X works as well.
C-c s c cscope-find-functions-calling-this-function
C-c s d cscope-find-global-definition
C-c s e cscope-find-egrep-pattern
C-c s f cscope-find-this-file
C-c s i cscope-find-files-including-file
C-c s n cscope-next-symbol
C-c s p cscope-prev-symbol
C-c s s cscope-find-this-symbol
C-c s t cscope-find-this-text-string
C-h C-h help-help
C-h a apropos
C-h b describe-bindings
C-h c describe-key-briefly
C-x C-b list-buffers
C-x C-c save-buffers-kill-emacs
C-x C-f find-file
C-x C-g keyboard-quit
C-x C-l downcase-region
C-x C-o delete-blank-lines
C-x C-q toggle-read-only
C-x C-r find-file-read-only
C-x C-s save-buffer
C-x C-u upcase-region
C-x C-v find-alternate-file
C-x C-w write-file
C-x C-x exchange-point-and-mark
C-x ( start-kbd-macro
C-x ) end-kbd-macro
C-x 0 delete-window
C-x 1 delete-other-windows
C-x 2 split-window-vertically
C-x 4 C-f find-file-other-window
C-x 4 C-g keyboard-quit
C-x 4 b switch-to-buffer-other-window
C-x 4 f find-file-other-window
C-x = what-cursor-position
C-x ^ enlarge-window
C-x ` next-error
C-x b switch-to-buffer
C-x d dired
C-x e call-last-kbd-macro
C-x f set-fill-column
C-x g goto-line
C-x h mark-whole-buffer
C-x i insert-file
C-x k kill-buffer
C-x n other-window
C-x o other-window
C-x p previous-window
C-x s save-some-buffers
C-x u undo
For a complete description of mg commands, see MG COMMANDS. To see the
active keybindings at any time, type "M-x describe-bindings".
Commands are invoked by "M-x", or by binding to a key. Many commands
take an optional numerical parameter, n. This parameter is set either by
M-<n> (where n is the numerical argument) before the command, or by one
or more invocations of the universal argument, usually bound to C-u.
When invoked in this manner, the value of the numeric parameter to be
passed is displayed in the minibuffer before the M-x. One common use of
the parameter is in mode toggles (e.g. make-backup-files). If no
parameter is supplied, the mode is toggled to its alternate state. If a
positive parameter is supplied, the mode is forced to on. Otherwise, it
is forced to off.
Help Apropos. Prompt the user for a string, open the *help*
buffer, and list all mg commands that contain that string.
Toggle the audible system bell.
Register an auto-execute hook; that is, specify a filename pattern
(conforming to the shell's filename globbing rules) and an
associated function to execute when a file matching the specified
pattern is read into a buffer.
Toggle auto-fill mode (sometimes called mail-mode) in the current
buffer, where text inserted past the fill column is automatically
wrapped to a new line. Can be set globally with set-default-mode.
Toggle indent mode in the current buffer, where indentation is
preserved after a newline. Can be set globally with set-default-
Move the dot to the first non-whitespace character on the current
Save backup copies to a ~/.mg.d directory instead of working
directory. Requires make-backup-files to be on.
Move cursor backwards one character.
Kill text backwards by n words.
Move cursor backwards n paragraphs. Paragraphs are delimited by
<NL><NL> or <NL><TAB> or <NL><SPACE>.
Move cursor backwards by the specified number of words.
Move cursor to the top of the buffer.
Move cursor to the beginning of the line.
Self-insert a character, then search backwards and blink its
matching delimiter. For delimiters other than parenthesis,
brackets, and braces, the character itself is used as its own
Toggle bsmap mode, where DEL and C-h are swapped.
Toggle a KNF-compliant mode for editing C program files.
Invoke the keyboard macro.
Capitalize n words; i.e. convert the first character of the word
to upper case, and subsequent letters to lower case.
cd Change the global working directory. See also global-wd-mode.
Toggle whether the column number is displayed in the modeline.
Copy all of the characters in the region to the kill buffer,
clearing the mark afterwards. This is a bit like a kill-region
followed by a yank.
Count the number of lines matching the supplied regular
Count the number of lines not matching the supplied regular
List the matches for the given symbol.
List global definitions for the given literal.
List functions called from the given function.
List functions calling the given function.
List locations matching the given text string.
List locations matching the given extended regular expression
List filenames matching the given filename.
List files that #include the given filename.
Navigate to the next match.
Navigate to the previous match.
Navigate to the next file.
Navigate to the previous file.
Create cscope's List and Index in the given directory.
Prompts the user for a named keymap (mode), a key, and an mg
command, then creates a keybinding in the appropriate map.
Delete backwards n characters. Like delete-char, this actually
does a kill if presented with an argument.
Delete blank lines around dot. If dot is sitting on a blank line,
this command deletes all the blank lines above and below the
current line. Otherwise, it deletes all of the blank lines after
the current line.
Delete n characters forward. If any argument is present, it kills
rather than deletes, saving the result in the kill buffer.
Delete any whitespace around the dot.
Delete leading whitespace on the current line.
Delete trailing whitespace on the current line.
Delete all lines after dot that contain a string matching the
supplied regular expression.
Delete all lines after dot that don't contain a string matching
the supplied regular expression.
Make the current window the only window visible on the screen.
Delete current window.
List all global and local keybindings, putting the result in the
Read a key from the keyboard, and look it up in the keymap.
Display the name of the function currently bound to the key.
View the differences between buffer and its associated file.
Process a numerical argument for keyboard-invoked functions.
Set all characters in the region to lower case.
Set characters to lower case, starting at the dot, and ending n
Return an mg version string.
Stop defining a keyboard macro.
Move cursor to the end of the buffer.
Move cursor to the end of the line.
Enlarge the current window by shrinking either the window above or
Evaluate the current buffer as a series of mg commands. Useful
for testing mg startup files.
Get one line from the user, and run it. Useful for testing
expressions in mg startup files.
Swap the values of "dot" and "mark" in the current window. Return
an error if no mark is set.
Invoke an extended command; i.e. M-x. Call the message line
routine to read in the command name and apply autocompletion to
it. When it comes back, look the name up in the symbol table and
run the command if it is found, passing arguments as necessary.
Print an error if there is anything wrong.
Justify a paragraph, wrapping text at the current fill column.
Select a file for editing. First check if the file can be found
in another buffer; if it is there, just switch to that buffer. If
the file cannot be found, create a new buffer, read in the file
from disk, and switch to the new buffer.
Same as find-file, except the new buffer is set to read-only.
Replace the current file with an alternate one. Semantics for
finding the replacement file are the same as find-file, except the
current buffer is killed before the switch. If the kill fails, or
is aborted, revert to the original file.
Opens the specified file in a second buffer. Splits the current
window if necessary.
Jump to definition of tag at dot.
Move cursor forwards (or backwards, if n is negative) n
characters. Returns an error if the end of buffer is reached.
Move forward n paragraphs. Paragraphs are delimited by <NL><NL>
or <NL><TAB> or <NL><SPACE>.
Move the cursor forward by the specified number of words.
Bind a key in the global (fundamental) key map.
Unbind a key from the global (fundamental) key map; i.e. set it to
Toggle global working-directory mode. When enabled, mg defaults
to opening files (and executing commands like compile and grep)
relative to the global working directory. When disabled, a
working directory is set for each buffer.
Go to a specific line. If an argument is present, then it is the
line number, else prompt for a line number to use.
Prompts for one of (a)propos, (b)indings, des(c)ribe key briefly.
Insert a string, mainly for use from macros.
Insert the contents of another buffer at dot.
Insert a file into the current buffer at dot.
Insert the bound character with word wrap. Check to see if we're
past the fill column, and if so, justify this line.
Use incremental searching, initially in the reverse direction.
isearch ignores any explicit arguments. If invoked during macro
definition or evaluation, the non-incremental search-backward is
Use incremental searching, initially in the forward direction.
isearch ignores any explicit arguments. If invoked during macro
definition or evaluation, the non-incremental search-forward is
Join the current line to the previous. If called with an
argument, join the next line to the current one.
Delete any whitespace around dot, then insert a space.
Abort the current action.
Dispose of a buffer, by name. If the buffer name does not start
and end with an asterisk, prompt the user if the buffer has been
Kill line. If called without an argument, it kills from dot to
the end of the line, unless it is at the end of the line, when it
kills the newline. If called with an argument of 0, it kills from
the start of the line to dot. If called with a positive argument,
it kills from dot forward over that number of newlines. If called
with a negative argument it kills any text before dot on the
current line, then it kills back abs(n) lines.
Delete n paragraphs starting with the current one.
Kill the currently defined region.
Delete forward n words.
Modifies the behaviour of backup-to-home-directory. Backup files
that would normally reside in /tmp are left there and not moved to
the ~/.mg.d directory.
Toggle whether the line number is displayed in the modeline.
Display the list of available buffers.
load Prompt the user for a filename, and then execute commands from
Bind a key mapping in the local (topmost) mode.
Unbind a key mapping in the local (topmost) mode.
Toggle generation of backup files.
Prompt the user for a path or directory name which is then
Mark n paragraphs.
Marks whole buffer as a region by putting dot at the beginning and
mark at the end of buffer.
When disabled, the meta key can be used to insert extended-ascii
(8-bit) characters. When enabled, the meta key acts as usual.
Process a negative argument for keyboard-invoked functions.
Insert a newline into the current buffer.
Insert a newline, then enough tabs and spaces to duplicate the
indentation of the previous line. Assumes tabs are every eight
Move forward n lines.
Turn off the modified flag in the current buffer.
Open up some blank space. Essentially, insert n newlines, then
back up over them.
The command to make the next (down the screen) window the current
window. There are no real errors, although the command does
nothing if there is only 1 window on the screen.
Toggle overwrite mode in the current buffer, where typing
overwrites existing characters rather than inserting them. Can be
set globally with set-default-mode.
Inserts a prefix string before each line of a region. The prefix
string is settable by using 'set-prefix-string'.
Move backwards n lines.
This command makes the previous (up the screen) window the current
window. There are no errors, although the command does not do a
lot if there is only 1 window.
Return to position where find-tag was previously invoked.
Suspend mg and switch to alternate screen, if available.
pwd Display current (global) working directory in the status area.
Query Replace. Search and replace strings selectively, prompting
after each match.
Replace string globally without individual prompting.
Replace strings selectively. Does a search and replace operation
using regular expressions for both patterns.
Insert the next character verbatim into the current buffer; i.e.
ignore any function bound to that key.
Perform a regular expression search again, using the same search
string and direction as the last search command.
Search backwards using a regular expression. Get a search string
from the user, and search, starting at dot and proceeding toward
the front of the buffer. If found, dot is left pointing at the
first character of the pattern [the last character that was
Search forward using a regular expression. Get a search string
from the user and search for it starting at dot. If found, move
dot to just after the matched characters. display does all the
hard stuff. If not found, it just prints a message.
Reposition dot in the current window. By default, the dot is
centered. If given a positive argument (n), the display is
repositioned to line n. If n is negative, it is that line from
Refresh the display. Recomputes all window sizes in case
something has changed.
Revert the current buffer to the latest file on disk.
Save the contents of the current buffer if it has been changed,
optionally creating a backup copy.
Offer to save modified buffers and quit mg.
Look through the list of buffers, offering to save any buffer that
has been changed. Buffers that are not associated with files
(such as *scratch*, *grep*, *compile*) are ignored.
Scroll backwards n pages. A two-line overlap between pages is
assumed. If given a repeat argument, scrolls back lines, not
Scroll the display down n lines without changing the cursor
Scroll the display n lines up without moving the cursor position.
Scroll the next window in the window list window forward n pages.
Scroll forward one page. A two-line overlap between pages is
assumed. If given a repeat argument, scrolls back lines, not
Search again, using the same search string and direction as the
last search command.
Reverse search. Get a search string from the user, and search,
starting at dot and proceeding toward the front of the buffer. If
found, dot is left pointing at the first character of the pattern
(the last character that was matched).
Search forward. Get a search string from the user, and search for
it starting at dot. If found, dot gets moved to just after the
matched characters, if not found, print a message.
Insert a character.
Toggle double or single spaces for end of sentences. Double is
the default. Currently only affects fill-paragraph.
Set case-fold searching, causing case not to matter in regular
expression searches. This is the default.
Preserve the case of the replaced string. This is the default.
Append the supplied mode to the list of default modes used by
subsequent buffer creation. Built in modes include: fill, indent
Prompt the user for a fill column. Used by auto-fill-mode.
Sets the mark in the current window to the current dot location.
Sets the prefix string to be used by the 'prefix-region' command.
Execute external command from mini-buffer.
Provide the text in region to the shell command as input.
Shrink current window by one line. The window immediately below
is expanded to pick up the slack. If only one window is present,
this command has no effect.
Split the current window. A window smaller than 3 lines cannot be
Start defining a keyboard macro. Macro definition is ended by
Suspend mg and switch back to alternate screen, if in use.
Prompt and switch to a new buffer in the current window.
Switch to buffer in another window.
Toggle the read-only flag on the current buffer.
Transpose the two characters in front of and under dot, then move
forward one character. Treat newline characters the same as any
Transpose adjacent paragraphs. If multiple iterations are
requested, the current paragraph will be moved n paragraphs
Transpose adjacent words.
undo Undo the most recent action. If invoked again without an
intervening command, move the undo pointer to the previous action
and undo it.
Add an undo boundary. This is not usually done interactively.
Toggle whether undo boundaries are generated. Undo boundaries are
often disabled before operations that should be considered
Toggle whether undo information is kept.
Show the undo records for the current buffer in a new buffer.
Repeat the next command 4 times. Usually bound to C-u. This
command may be stacked; e.g. C-u C-u C-f moves the cursor forward
Upper case region. Change all of the lower case characters in the
region to upper case.
Move the cursor forward by the specified number of words. As it
moves, convert any characters to upper case.
Toggle the visible bell. If this toggle is on, the modeline will
Record name of the tags file to be used for subsequent find-tag.
Display a bunch of useful information about the current location
of dot. The character under the cursor (in octal), the current
line, row, and column, and approximate position of the cursor in
the file (as a percentage) is displayed. The column position
assumes an infinite position display; it does not truncate just
because the screen does.
Ask for a file name and write the contents of the current buffer
to that file. Update the remembered file name and clear the
buffer changed flag.
yank Yank text from kill-buffer. Unlike emacs, the mg kill buffer
consists only of the most recent kill. It is not a ring.
MG DIRED KEY BINDINGS
Specific key bindings are available in dired mode.
RET, e, f and C-m dired-find-file
d and C-d dired-flag-file-deletion
MG DIRED COMMANDS
The following are a list of the commands specific to dired mode:
Create a directory.
Copy the file listed on the current line of the dired buffer.
Delete the files that have been flagged for deletion.
Rename the file listed on the current line of the dired buffer.
Replace the current dired buffer with an alternate one as
specified by the position of the cursor in the dired buffer.
Open the file on the current line of the dired buffer. If the
cursor is on a directory it will be opened in dired mode.
Flag the file listed on the current line for deletion. This is
indicated in the buffer by putting a D at the left margin. No
files are actually deleted until the function dired-do-flagged-
delete is executed.
Open the file on the current line of the dired buffer in a
Move the cursor to the next line.
This function works just like dired, except that it puts the
dired buffer in another window.
Move the cursor to the previous line.
Refresh the dired buffer.
Scroll down the dired buffer.
Scroll up the dired buffer.
Remove the deletion flag for the file on the current line.
Remove the deletion flag from the file listed on the previous
line of the dired buffer, then move up to that line.
Close the current dired buffer.
There are two configuration files, .mg and .mg-TERM. Here, TERM
represents the name of the terminal type; e.g. if the terminal type is
set to "vt100", mg will use .mg-vt100 as a startup file. The terminal
type startup file is used first.
The startup file format is a list of commands, one per line, as used for
interactive evaluation. Strings that are normally entered by the user at
any subsequent prompts may be specified after the command name; e.g.:
global-set-key ")" self-insert-command
global-set-key "\^x\^f" find-file
global-set-key "\e[Z" backward-char
auto-execute *.c c-mode
Comments can be added to the startup files by placing ";" or "#" as the
first character of a line.
~/.mg normal startup file
~/.mg-TERM terminal-specific startup file
~/.mg.d alternative backup file location
/usr/share/doc/mg/tutorial concise tutorial
Since it is written completely in C, there is currently no language in
which extensions can be written; however, keys can be rebound and certain
parameters can be changed in startup files.
In order to use 8-bit characters (such as German umlauts), the Meta key
needs to be disabled via the "meta-key-mode" command.
Multi-byte character sets, such as UTF-8, are not supported.
OpenBSD 6.4 August 29, 2018 OpenBSD 6.4
[Unix Hosting |
[Engineering & Automation |
Software Development |